The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads . Each output uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of each channel. \n \nThe outputs are parameterized individually via ETS3/4. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control. \n \nThe MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the measured data can be transmit in different data formats (mA/A/kW) onto the KNX bus. Additionally the device provides an hour/service interval meter. The integrated counter allows to capture the active power consumption exactly. \n \nIf the mains voltage fails, all outputs hold their current position. After bus voltage failure or recovery the relay position is selected in dependence on the parameterization. \n \nThe MDT Switch Actuator is a modular installation device for fixed installation in dry rooms. It fits on DIN 35mm rails in power distribution boards or closed compact boxes. The MDT Switch Actuator has a separate power supply terminals for each channel. \n

FEATURES

\n- Production in Germany, certified according to ISO 9001 \n- Push Button and LED indicator for each channel \n- NO and NC contact operation \n- Time functions (switch-on/switch-off delay, staircase light function) \n- Status response (active/passive) for each channel \n- Logical linking of binary data, 8 scenes per channel \n- Hour meter \n- Central switching functions and block functions \n- Adjustable behaviour in case of bus voltage failure or return \n- Each contact has an own supply phase \n- Integrated True RMS current measurement (current, kW) \n- Current measurement range 10mA-20A \n- Fast reaction <1s at Master/Slave operation \n- Active power measurement with integrated counter (Wh/kWh) with current and voltage rating \n- Power supply via KNX bus \n- Modular installation device for DIN 35mm rails \n- Integrated bus coupling unit \n- 3 years warranty \n

TECHNICAL DETAILS

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Number of outputs	6
Current measurement range	10mA - 20A
Measuring inaccuracy	2%
Sampling rate	2000 samples/500ms
Output switching ratings:
Ohmic load	16/20A*
Capacitive load	200uF at 16A
Voltage	230VAC
Maximum inrush current	600A/150μs \n300A/600μs
Maximum load:
Incandescent lamps	3680W
Halogen lamps 230V	3680W
Halogen lamps, electronic transformer**	2000W
Fluorescent lamps, not compensated	3680W
Fluorescent lamps, parallel comp.	2500W
Max. number of electronic transformers	28
Output life expectancy (mechanical)	1.000.000
Specification KNX interface	TP-256
Available application software	ETS 4/5
Permitted wire gauge:
Screw terminal	1 x 0,5 - 4,0mm² solid core / finely stranded \n2 x 0,5 - 2,5mm² solid core / finely stranded (no mix allowed)
KNX busconnection terminal	0,8mm Ø, solid core
Torque screw terminal	0,5Nm
Power supply	KNX bus
Power consumption KNX bus typ.	< 0,4W
Operation temperature range	0 to + 45°C
Enclosure	IP 20
Dimensions MDRC (Space Units)	8SU

\n